The Light is UV and Ozone sanitizer. The device can be used for various type of musical instruments and accessories. Followings are few examples. Be creative for yourself and your music!
How to use the Light
Additional Information
•This device is designed to work in supplement to other conventional cleaning methods, and not to replace them.
•Instrument must be in an enclosure.
•The effectiveness of the device may vary according to shape and size of the mouthpiece and instrument.
•Clinical test data is not yet available for instrument cleaning.
•Instrument must be in an enclosure.
•The effectiveness of the device may vary according to shape and size of the mouthpiece and instrument.
•Clinical test data is not yet available for instrument cleaning.
Mouthpiece
-Gently place the bore of the mouthpiece carefully over the UV lamp.
-The mouthpiece should rest lightly on the rubber Mounter covering the bottom of the lamp.
-Screw the Main Cap back in place until the tip of the mouthpiece lightly touches the inside of the cap.
-Set the time of operation by lightly pressing the touch-sensitive power button for 15 minutes.
-The mouthpiece should rest lightly on the rubber Mounter covering the bottom of the lamp.
-Screw the Main Cap back in place until the tip of the mouthpiece lightly touches the inside of the cap.
-Set the time of operation by lightly pressing the touch-sensitive power button for 15 minutes.
Reed (with or without mouthpiece)
-Insert reeds to a reed holder (optional).
-Close the Main Cap .
-Keep enough room between reeds and top of the Main Cap.
-Set the time of operation by lightly pressing the touch-sensitive power button for 15 minutes. -Mouthpiece and reeds may be sanitized at the same time. Both can be kept in The Light.
-Close the Main Cap .
-Keep enough room between reeds and top of the Main Cap.
-Set the time of operation by lightly pressing the touch-sensitive power button for 15 minutes. -Mouthpiece and reeds may be sanitized at the same time. Both can be kept in The Light.
Saxophone and Other horns with bigger bell
-Put on Bell Cap.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation. Bigger horns needs 60 minutes
-While The Light is beeping for 10 seconds, insert it into bell. -Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation. Bigger horns needs 60 minutes
-While The Light is beeping for 10 seconds, insert it into bell. -Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
Clarinet and other horns with smaller bore
-Remove Main Cap and Bell Cap.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation.
-While the device is beeping for 10 seconds, put the device into a bore of the horn.
-Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation.
-While the device is beeping for 10 seconds, put the device into a bore of the horn.
-Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
Other Instrument
-Remove Main Cap and Bell Cap.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation.
-While the device is beeping for 10 seconds, put the device into a bore of the horn.
-Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
-Set the time of operation by lightly pressing the touch-sensitive power button twice for 30 minutes operation.
-While the device is beeping for 10 seconds, put the device into a bore of the horn.
-Put the horn in the case or securely place in safe place.
-For better result, place the horn in closed case or bag. Plastic bag can be used.
