Size Selection

All ligatures are now resizable

Beginning with 2019 models, Silverstein Ligatures include a precision fit adjustment mechanism and can be increased or decreased by one size using a standard 1.5mm hex wrench. 

Ligature Sizing Legend

From Gen 1 to Gen 5 Models

Selecting your size

Use this database to find known ligature sizes for various saxophone and clarinet mouthpieces.
Select your instrument category, mouthpiece manufacturer, instrument type and model identifier from the drop-down menus.
The corresponding Silverstein Ligature size will appear within a few seconds.
Sizing Chart by mouthpiece model
Your instrument
Brand of your mouthpiece
Type of your instrument
Mouthpiece model
Wait few moments while searching
Sending
You can measure your mouthpiece dimensions to determine the appropriate ligature size.
Measure the diameter (using a caliper) or the circumference (using a tape measure) on the widest part of the mouthpiece where the ligature will sit.
Select your measurements from the available drop-down menus. If there is an overlap, then choose the smaller dimensions.
The corresponding Silverstein Ligature size will appear within a few seconds.
Sizing Chart by mouthpiece measurement
Your instrument
Diameter of your mouthpiece
Don't choose
It may take few moment to decide a ligature model
Sending

This is a PDF document that displays all mouthpiece models along with their corresponding Silverstein Ligature sizes.

Download Model Selection Chart

Still Cannot Decide?

If you don’t have access to a caliper or tape measure, our Customization Order Template (COT) will allow us to determine your ligature size for you.

Download the COT Form and the Sample Form by clicking on the link. Print out the blank template, and fill in the requested header information.

Carefully align your mouthpiece squarely onto the grid. Be sure to also verify the proper scale of the grid using the form’s Verification Guide.

Snap two pictures from directly above the sheet of paper. It is very important that the camera lens is directly over the mouthpiece, as in the sample picture (at left). Take one picture with the mouthpiece laying on its bottom table, and take another picture with the mouthpiece on its side.

Send your pictures to: customerservice@silversteinworks.com

Our friendly customer service team will take care of the rest.

If a standard size ligature does not fit your mouthpiece, then we can custom fit a ligature to your unique needs.

Please contact us if you have any questions!

Download COT Form
Downlaod COT Sample